They bought Hynix when they went bankrupt a few years ago. They are the only American fab company that makes memory left. They are partners with Intel on NAND chips for SSD's. 256Meg x 64.upgrade for Acer Aspire M5910 system.$35.99Based on what that says, I believe 2 of these kits will get your 8Gb of memory for that machine. So that was no help.However, does.Your Acer Aspire M5910system specs as shippedmemoryMaximum memory: 8192MBSlots:4 (2 banks of 2).Not to exceed manufacturer supported memory.4GB kit (2GBx2) DDR3 PC3-12800 Unbuffered NON-ECC 1.5V 256Meg x 64CT4051335DDR3 PC3-12800. The acer site does not even list compatible memory product numbers. Can you make adjustments to the DRAM (voltage/timings) if problems? Again prob not as prebuilts normally have a locked BIOS. Here will it worked with a locked CPU (prob not at 1600), and the MC is more the determining factor than the mobo. There's a lot more to selecting DRAM than simply looking at a list, will it work with the mobo, Yes. And here you you suggest 1600 and 4 sticks, which also can be a problem, the CPU is not OCed and is only rated to 1066/1333 which seldom can run 4 sticks of 1600 (at 1600 anyway), this is also a prebuilt, prob with a locked BIOS that may not be able to even set up 4 sticks of native 1600 down to 1066 or 1333. Will it work, Yes.you say a 2x2GB set and say get two - mixing DRAM, even of the same exact model is a crapshoot, there are no guarantees. Hynix was another memory manufacturer.When they say Crucial memory will fit a specific model of motherboard or machine, it will.Simply saying DRAM will work on a mobo is only part of the whole process, i.e.
H57H AM2 MOTHERBOARD SPECIFICATIONS DOWNLOAD
On acer page i could download and flash it to p01-a4 if that makes any difference? FROM SITE: Updates CPU Module from 8.00.15CPU-i701.0C to 8.00.15CPU-i701.0F and Disable Intel Enhanced Debug mode.
H57H AM2 MOTHERBOARD SPECIFICATIONS UPGRADE
Hi,I had 4x 2gb ddr3 / 10600 unbuffered 240pin ram memory installed in my acer m5910, everything worked fine (stock)Wanted to upgrade my computer and bought 4x4 4gb of same ddr3 for total of 16gbAfter installing 4 new sticks acer didnt even boot up, tried with different ports and then with only 2x4 sticks and same thing happened.Then i installed my old 4x2gb memory back everything worked again fine.Thing is my motherboard should support 16gb max: whats the problem?BTW my bios version is p01-a3.
0 kommentar(er)
